Servo Voltage Stabilizer

Servo Voltage Stabilizer

BILGON make servo stabilizers are one of best latest digital power saving technology in country strictly adhering BIS9815:1994 standard & can be installed on main incoming supply hence no need to install separate stabilizers for individual system. It provides you smooth supply without any hunting .We are in this field from past 32 years and PAN India presence.

Technical Data :

 

S.No.
Parameter
Single Phase Unit
Three Phase Unit
1.
Rating
1 KVA to 30 KVA
6 KVA to 1500 KVA


2.

 


Input Voltage Range

 
a) 207V - 280V
b) 180V - 280V
c) 160V - 280V
d) 120V - 280V
 
a) 360V - 480V
b) 340V - 480V
c) 300V - 480V
d) 200V - 480V
e) 150V - 480V
3.
Nominal Output Voltage
230V
400V/415V
4.
Output Voltage Accuracy
± 1%
± 1%
5.
Line Frequency Variation
50Hz
50HZ
6.
Effect of Power Factor
None
None
7.
Wave Form Distortion
NIL
NIL
8.
Control
Digital / Analogue
Digital / Analogue
9.
Response Time
10 ms.
10 ms.

10.
 
Voltage Correction Rate
Air Cooled
Oil Cooled
 
25V / Sec.
15V/ Sec

40V / Sec
25V / Sec.
11.
LCD Display (20 x 2 matrix)
Date & Time, Input Voltage, Output Voltage & Current


12.

 


Log Book Memory (Non-volatile)

 
No. of Hrs. of operation on mains.
Peak Current demand.
Nos. of Abnormal High Voltage cut-off events.
Nos. of Abnormal Low Voltage cut-off events.
No. of Hrs. of operation on DG.


13.

 


Programmable Features
Through 2-parallel way resettable passwords)

 
HV cut-off set.
LV cut-off set.
O/L trip set.
Time delay set
Operating mode (auto/manual)

14.
 
Cooling:
1. Air Cooled
2. Oil Cooled

1 KVA to 40 KVA & above
10 KVA to 1500 KVA & above
15.
Efficiency
97%


16.


 


Protection


 
Overload & Short Circuit Protection
High/Low Voltage Cut Off
Single Phase Sequence Change Protection
Single Phase Prevention System
Over Temperature Cut Off (Optional
By Pass Arrangement (for in case of Emergency)
17.
Surge Protection
Class C Type Secondary Surge Protec

 

Field of application :

  • Life
  • Computer / CNC Machine
  • Printing Press
  • Plastic Moulding Machine
  • The machine used in industries


Optional features & protection as per customer requirement :

  • Overload and short circuit protection
  • H/L cut off
  • Single phase prevention
  • Reverse phase sequence
  • Remote control of stabilizer (with wire)

 

Isolation Transformer

Isolation Transformer

Technical Data :

 

S.No.
Parameter
Isolation Transformer
1.
 
Rating
 
0.5 KVA to 25 KVA single phase
3KVA to 1000 KVA three phase
2.
Phases
Three Phase / Single Phase
3.
Cooling
Natural Air Cooled / Oil Cooled
4.
Input Voltage Range
220, 240V in single phase 415, 433 V in three phases or as per requirement
5.
Output Voltage Range
220, 240V in single phase 415, 433 V in three phases or as per requirement
6.
Ratio
1:1
7.
Vector Group
Dyn 11
8.
Efficiency
More than 95%
9.
Class of Insulation
F- Class or as per requirement
10.
Insulation Resistance
Greater than 100 mega ohms at 500V DC.
11.
Winding & Wiring Material
E C grade as per Customer Requirement.
12.
Input / Output Termination
Connectors / Bus Bar.

 

Isolation Transformer :

Separate neutral bushing shall be brought out for earthing potential difference between neutral to earth less the one volt with all standard fittings like digital temperature meter, adequate number of cooling radiators, lifting hooks one set, Earthing terminal two nos. complete with Over load /short circuit protection
 

Note :

  • Isolation Transformer of other voltage range/ capacity are also available as per customer requirement.

 

LT Panel

LT Panel

We "Bilgon" are sepecialized in LT-Panels. We have delivered so many LT-Panels in various industries in various field.

Contact us for LT-Panels.

Start Buying With Us.